Support this website by joining the Silver Rails TrainWeb Club for as little as $1 per month. Click here for info.

















Web Page Hit Counter Configuration Options
www.trainweb.com/tech/counter.html

How to call the program? (all platforms)

You can refer to the program from a web page like this:

<img src="http://web.liberty.com/cgi-bin/Count.cgi?df=sample.dat">

Replace sample.dat in the above line and in all examples below with the visit counter that has been assigned to you and was sent to you from TrainWeb via e-mail.

The string between ? and " is called the QUERY_STRING. Make sure there is no newlines in the <img src= line and no space in the QUERY_STRING.

The counter program has lots of options, you can make it work and look the way you desire. In the query string, you can use the options described in the table below. The options can be separated by a | or a &. You can use either one or combination of both. Here is an example:

<img src="http://web.liberty.com/cgi-bin/Count.cgi?ft=T&frgb=gold|df=sample.dat">

The options can be in any order and not case sensitive.

Anyway, look at this Example Page you will get the picture.

Counter options (all platforms)

[Originally written in HTML table by Kevin]

Parameter Name Description Default
cache=B
expires=X
These parameters can be used to change the image caching behavior of certain web browsers. The boolean value of cache hints the browser whether to cache the image or not. The integer value of expires specifies the cache expiration duration time in seconds. If you specify cache=F, the browser will be hinted to cache the image for the amount of seconds specified with expires parameter. if cache=F and expires=0, then the browser should not cache the image, that is whenever you come back to the page, the counter or clock will be refreshed. Use this feature with discretion as it may increase load on your system. The expires parameter is meaningless without cache=F, that means, if cache=T is specified, expires parameter is ignored and the counter will not generate any HTTP Expires header. This is the default behavior. The valid values for the boolean parameter cache is Y,N,F,T 1 or 0. The valid integer range of the expires parameter is between 0 and 604800 (7 days).

Note, these parameters will work with browser supports the HTTP Expires header as specified in HTTP specification. By default, most web browsers caches the image got from the counter. That means, if someone visits your page and comes back after a while, the counter or clock does not get refreshed.

cache=T
expires=0

display=X Specifies what to display. A valid string can be specified with display= parameter to display counter, clock or date. The valid value for the string parameter X is counter, clock or date For counter, this parameter is not need as counter is the default display type. display=counter
timezone=X Display time/date of the specified timezone. The parameter timezone= is only significant with display=clock or display=date. Use this parameter if you want to display time or date of another timezone. The timezone must be specified with a negative or positive four digit offset from GMT, for example: timezone=GMT-0500 or timezone=GMT+0000 or timezone=GMT+0530. The routine to display time of various timezones are written in a generic way. Therefore, the unix machines will not be aware of daylight saving time because of the way the routine is written. For example, if daylight saving time is on, to display time of NY, the timezone will be timezone=GMT-0500 instead of timezone=GMT-0400.

If the clock displays your local time wrong, specify your timezone with that parameter in order to display the correct time.

None.
tformat=X

Time format in 12 or 24 hour. This parameter can be used to display time in 12 or 24 hour format. The valid values for the parameter X is 12 or 24. tformat=12
dformat=X Specifies date format. This parameter is only significant with display=date. The valid value for the string parameter X is any combination of MMDDYY (Month-Day-Year). For example, dformat=ddmmyy, dformat=YYMMDD. dformat=MMDDYY
istrip=B Use of image strip On/Off The boolean value of istrip specifies whether to use image strip or not. If you specify istrip=F, the program will look for the individual digit image files in the digits/style directory. The valid values for the Boolean parameter istrip are Y, N, T, F, 1 or 0. istrip=T
ft=X Frame Thickness You can wrap the counter in an ornamental frame of X pixels thick. Use 0 for no frame. Values over 5 make a nice 3-D effect. ft=4
frgb=R;G;B
or
frgb=RRGGBB (in hex)
Frame Color Specifies the color of the frame in RGB (red/green/blue) format. Each color component, R, G, and B is specified as a value between 0 and 255. If you use ft= without a frgb= param, the default color is used.

If you specify a frgb= without a ft=, then the frame thickness defaults to 5. All the examples show ft=5. The color can be specified as hex string or a name. Do not use a # before the hex string as Netscape. For example, if you want to specify white in hex, use frgb=ffffff. You also can use a color name (e.g. frgb=blue) if the counter configured to do so (look at the cfg file). Look at the color name mapping database for some hints about color name database.

frgb=100;139;216 or
frgb=648bd8
tr=B Transparency On/Off You can specify if your counter image will have a transparent color with the Boolean B. So tr=Y means there will be a transparent color. It does not matter if the GIF files used for the digits are "transparent"; you must specify explicitly which color to make transparent. If you specify a trgb=, then you do not need to specify tr=Y. If you specify tr=Y and do not specify trgb=, then the default color black will be transparent. The valid values for B are Y, N, T, F, 1, or 0. tr=F
No Transparency
md=X Max Digits Defines maximum number of digits to display. Any value between 5 and 10 inclusive are permitted. Padding with leading zeros is automatically done for you; longer counts are truncated to the given X. md=6
Without padding
pad=B Left padding with 0s Turn padding on/off in conjunction with md= setting. Valid values for the Boolean parameter B are Y, N, T, F, 1, or 0. pad=N
Without specification of a md=value

pad=Y
With specification of a md=value

dd=A Digit Directory Denotes directory of a specific styles of digits. Four styles of digits are supplied. They are kept at the directories A,B,C and D respectively. dd=A
My green LED digits
image=gif_file Display this GIF file You can display any GIF image specified with this parameter. The location of this file is determined by the dd= parameter, that no path in the GIF file is allowed. All attributes of the counter apply to the image. Not, if you specify a datafile with df parameter and if incr is true, then counter will be incremented in the datafile. None
comma=B Display comma after every 3rd digit from right. The boolean value of parameter comma specifies whether to display comma after every 3rd digit from right. If you use this parameter as true, the left padding with zeros will be turned off. comma=F
srgb=R;G;B
or
srgb=RRGGBB (in hex)

prgb=R;G;B
or
prgb=RRGGBB (in hex)
Change a color of the image to a target color on the fly. Any one color of the image can be changed to a different color on the fly. srgb stands for source color, that is the color to change. prgb stands for pen color, that is the target color. The values for srgb and prgb can be colon separated color components (e.g, srgb=255;0;0), a hex value (e.g. srgb=ff0000) or a color name (e.g. srgb=red). The color name can be used if you configured the counter to do so (look at the cfg file). srgb=00ff00
(0;255;0 green)

prgb=00ffff
(0;255;255 cyan)

With chcolor=T

chcolor=B Change a color of the image. This parameter is usually used to change the default green color to cyan. That is if you specify chcolor=T, and you want to change green to cyan, then you do not need to specify srgb and prgb parameters. 1x1 GIF is displayed. The valid values for the Boolean parameter B are Y, N, T, F, 1, or 0 chcolor=F
st=X Start Count This parameter is used to set the initial value of the counter to some number X. Note that this parameter has no effect once the counter has started to count the page hits. st=1
Count starts at 1
sh=B Show digits Used to turn display of digits on or off according to the Boolean B. When sh=T, counter will be displayed and incremented, this is the default behavior.

If sh=F no digits will show, but the counter will still increment; instead of digits a transparent 1x1 GIF is displayed. The valid values for the Boolean parameter B are Y, N, T, F, 1, or 0

sh=Y
df=data_file Datafile to store count (assigned to you by TrainWeb) One special use of the parameter is df=RANDOM. This returns a random number using the fractional portion of the host's time of day clock as a seed for the generator. Unlike all other WWWcounter parameters, the file name provided is case-sensitive, except for the value random. Or Random, or rANDOM, etc. df=random
if no datafile is specified
incr=B Increment Count Makes it possible to display the current count without incrementing the count. This can be used to examine the count for reporting or other purposes without adding to the count. Valid values for the Boolean parameter B are Y, N, T, F, 1, or 0.

incr=T
Increment the counter
lit=X Display literal Makes it possible to display a given, predetermined string. The valid values for the string X are digits, a,p,: and - None
negate=B Negate the color Makes it possible to negate the color of the counter digits. Note that the Frame is exempted from negating. Valid values for the Boolean parameter B are Y, N, T, F, 1, or 0. negate=F
Do not negate
degrees=X Rotate X degrees Makes it possible to rotate the counter image X degree. The possible values of X is 90, 180, 270 and 360. Note 360 is meaningless as the counter will come back to the original 0 degree. degrees=270
With rotate=Y and without degrees=X
rotate 270 degrees clockwise
rotate=B Rotate On/Off The Boolean value B turns on or off rotating. If you use degrees= setting, rotate is not needed. Valid values for the Boolean parameter B are Y, N, T, F, 1, or 0. rotate=F
Do not rotate

Digit Styles (all platforms)

Style A styleA designed by the author
(digits/A/strip.gif)
Style B styleB Borrowed from HTML-access counter. (digits/B/strip.gif)
Style C styleC designed by benjamin@pop3.oro.net
(digits/C/strip.gif)
Style D styleD designed by the author
(digits/D/strip.gif)
Style E styleE designed by the author
(digits/E/strip.gif)

Click here to return to the main TrainWeb Technical Support Web Page.


Click below for pages in the directory of TrainWeb sties:
0-9 A B C D E
F G H I J K
L M N O P Q
R S T U V W
X Y Z
CLICK HERE FOR THE FULL CATEGORY DIRECTORY















ad pos61 ad pos63
ad pos62 ad pos64



Support this website by joining the Silver Rails TrainWeb Club for as little as $1 per month. Click here for info.